The Best iPhone 16 Cases and Accessories

The Best iPhone 16 Cases and Accessories


There are so many cases. Here are other ones I’ve tried that I don’t like as much as the picks above but might be suitable for you.

Casely Bold ($35) and Classic Cases for $25: I like the Casely Classic more than the bold—the buttons don’t feel as mushy, and the hardshell plastic feels nice. Both have a nice cutout for Camera Control, with raised edges around the screen, and good MagSafe support. They also look fun! There’s even a collaboration with the Metropolitan Museum of Art so you can get your favorite painting on the back of your iPhone. Forget the trek to New York.

OtterBox Lumen MagSafe Case for $50: Want to show off your iPhone but still want a bit of flair from your case? OtterBox’s Lumen Series is one of a few in its lineup that doesn’t have the weird, asymmetrical gap in the case for the Camera Control (like the Beats case above). It matches the Camera Control experience on Apple’s official cases—the button is covered but you can still work it the same way. The color accents reflect nicely in the light, and the buttons are responsive. Just know that clear cases tend to attract smudges and dust fairly easily.

Cyrill Kajuk Mag ($23) and UltraSheer Mag ($22): These cases have very grippy sides, so much so that they feel rough. I’m still deciding whether I like it; it’s like sandpaper. The UltraSheer Mag has some fun designs (including a transparent color), but the Kajuk Mag also comes in a bundle with a crossbody strap.

Native Union Active MagSafe Case for $50: It’s hard to find much fault with this case. It checks off all the boxes and looks pretty while also being made from 35 percent recycled materials. I also tested Native Union’s (Re)Classic MagSafe Case ($60), which looks stunning and arguably the case I’d put on over the Active. It almost looks like crocodile leather but nope, it’s plastic. Too bad the buttons are a little tough to press. The Camera Control cutout could stand to be more spacious, and this isn’t a problem on the Active case.

Zagg Manhattan Snap, Milan Snap, Crystal Palace Snap, Denali Snap, and London Snap for $50: Zagg sent me a bunch of cases, and they all fit well and functioned perfectly, with roomy cutouts for Camera Control and clicky buttons. Some, like the Milan Snap, smudge too easily. But the London Snap stood out in design the most for me, with a lovely fabric texture on the back.

Caseology Athlex Mag ($17), Nano Pop Mag ($19), and Parallax Mag ($19): All three of these cases from Caseology are good, though I would probably go for the Parallax, because it looks the most interesting. The buttons are clicky, and MagSafe works fine, though the edges around the display could be a bit taller.

Nomad Sport Case ($50) and Rugged Case ($60): I like Nomad’s cases a lot and the Rugged is an excellent option, with distinguishable power and Action buttons, and a thick bumper that contours to your finger. There’s also the Sport case, but I found it too slippery. These cases are only available for the Pro models.

Tech21 EvoClear ($50), EvoDusk ($50), and EvoCrystal Crossbody ($80): The EvoClear is a nice clear case if you’re looking for alternatives. It’s just not as slim as the Totallee nor does it have the covered-up Camera Control button like the Spigen I recommend above. I like the EvoDusk less, it’s just way too slippery. The EvoCrystal is nearly identical to the EvoClear but comes with a lanyard crossbody strap. There are no instructions on how to install the attachment points to the case—I looped it through but my result doesn’t look similar to what’s on the company’s website. I scanned a QR code on the box to “learn more” but it took me to a dead page. Either way, the lanyard works fine and is comfortable across my body, but the overall look is a bit cheap considering the price.

Mujjo Shield Leather MagSafe Case for $59: The Shield is Mujjo’s best case this year. It’s made from full-grain vegetable-tanned leather that should develop a nice patina over time. The edges around the screen and cameras are raised, and the buttons are clicky. There’s a sloped cutout for the Camera Control button, and, unlike Mujjo’s other cases, this one has plenty of space for your finger to comfortably press the button and slide around to navigate the menus. The edges of the case feature a rigid bumper grooved for a nicer, more natural grip. It’s a shame the Shield is only available for the iPhone 16 Pro and 16 Pro Max. Mujjo is also a certified B Corp, meaning it has been independently vetted to high environmental standards in its manufacturing.

Casetify Impact MagSafe Case for $72: Casetify cases are expensive but the tradeoff is that they are infinitely customizable. The Impact Case has long been my go-to recommendation because it’s the most normal-looking case from the company. The sides are super grippy, the buttons clicky, and there’s a nice spacious cutout for Camera Control. Use Casetify’s Customize tool to change up the style of the case, and you can even add your name to personalize it even further.

Apple Silicone MagSafe Case and Clear MagSafe Case for $49: If you want to stick with official Apple cases, these are fine. They’re just a bit expensive for what you get. The silicone cases tend to pick up pet hair and dust very easily, so they feel icky. The Clear case works well, but the buttons require more force to press than our picks above.

OtterBox Symmetry Soft Touch MagSafe ($60), Symmetry Ultra Slim MagSafe ($50), and Symmetry Cactus Leather MagSafe ($60): All of these cases have a big gap for Camera Control, which I don’t love. It just looks awkward and is not symmetrical (ironic). The Soft Touch feels very nice but has mushy buttons. The Ultra Slim doesn’t have that problem, but it’s slippery, and the Cactus Leather model is solid overall. Just know that cactus leather isn’t necessarily as environmentally friendly as marketed.

Wave MagSafe Case for $48: You can choose from a lot of colors, but this is an otherwise dull-looking case. The Action Button is a little harder to press, and the whole thing is a bit slippery, but everything else works fine. The edges around the screen are raised, and the MagSafe connection is good. The main reason to buy the Wave is because it’s made from biodegradable materials (wheat straw), and the company is a member of Surfers Against Sewage 250 Club, a charity that works to keep the UK coastline clean. Wave Case is based in the UK, so do note the international shipping fee.

Speck Presidio 2 Pro MagSafe Case for $50: I tried an array of Speck cases, and they’re all solid, but my favorite is the Presidio 2 Pro. I funnily found it grippier than the Presidio 2 Grip. It checks off all the other boxes, with a roomy, sloped cutout for Camera Control, though the power button is slightly harder to press. Speck has a proprietary locking system called ClickLock that makes the MagSafe system more secure, but you need to pair it with Speck’s accessories to get it to work. I think if you tend to use MagSafe wallets, then this might be useful, as it does hold the wallet more securely than standard MagSafe. But for people mounting the iPhone, go with Peak Design’s SlimLink.

Spigen Tough Armor MagSafe Case for $26: It’s been years and Spigen has not figured out a way to make this kickstand work in portrait and landscape orientation. (It only works in the latter.) Other than that, this is a fine case, if a bit bulky, with clicky buttons and a spacious and sloped cutout for Camera Control. The design’s a bit dull.

Burga Tough Case ($24) and Burga Elite Case ($85): Burga’s Elite case is very slippery; there are some grips on the edges, but they don’t help much. There’s a spot to attach a lanyard though. The buttons are clicky on both these cases, with raised edges around the screen, and a cutout for Camera Control. The Tough and Elite cases do not have MagSafe support, so if you want a case without it, here you go. (Why?) That said, the company does sell an Elite MagSafe case ($90) but the price is a little ridiculous. At least there are lots of designs to choose from.

Smartish Wallet Slayer Vol. 1 for $30: This case has an integrated wallet that lets you store two to three cards, and you can easily push them out from the gap on the left. I just don’t like integrated wallet cases in this style that add bulk and disable features like MagSafe and wireless charging, so it’s not for me, but maybe you don’t mind.

BodyGuardz Ace Pro MagSafe Case for $50: Do you want a lanyard? This case comes with one preinstalled (you can remove it). I found the case too slippery, and the buttons are flush with the case, which might contribute to that. At least they’re clicky. Camera Control also works well here, but the clear back attracts a lot of smudges. There’s also a completely clear version called the Accent Clear ($55), but I didn’t like it as much as the Totallee Clear case.

MagEasy Odyssey Strap M MagSafe Case for $45: This is pretty good value considering you get a protective case and a crossbody lanyard. You can even swap out the bumpers at the bottom for when you don’t want the lanyard, though how many times are you going to do this? You’ll more likely lose the spare bumpers. The Action Button is a bit mushy, but the rest work well. I’d have liked more room in the Camera Control cutout though.

Incase Icon MagSafe Case for $60: I tried a bunch of Incase cases, from the Slim to the Halo, and the Woolenex material in the Icon is my favorite, because it’s super nice to hold. It’s fairly grippy and checks off all the other boxes.

Mous Limitless 6.0 ($65) and Clarity 3.0 ($70): I have no major qualms with these Mous cases, and you also have a few designs to choose from, like the walnut or the speckled fabric. There’s a big gap for Camera Control, and I think it makes the case look awkward, but otherwise, there are clicky buttons, fun textures, strong MagSafe connectivity, and a spot to attach a lanyard.

Casetify Ripple ($62), Bounce ($82), and Ultra Bounce Case ($102): Casetify cases are very customizable, but the company has been leaning hard into its Bounce case design, where it accentuates the corners of the case for improved shock absorption. It just kind of makes the whole thing bulky too. The Ripple case is a bit more reserved, with the Ultra Bounce going balls-to-the-wall crazy with multiple attachment points if you want to affix a keychain carabiner or a crossbody strap. It’s expensive and a lot. But at least the cases are solid, with reliable buttons, good MagSafe support, and raised edges around the display.

Moft Snap Case MOVAS With MagSafe for $50: This is a very simple case. The buttons aren’t the clickiest, and you get a big cutout for the Camera Control button. It’s fairly slim, with raised edges around the display. I prefer the company’s accessories to its case, and you don’t need a Moft case to use them. That said, you do need it if you want to pair it with the brand’s excellent phone lanyard.

Belkin ScreenForce InvisiGlass Privacy Treated Screen Protector for $35: You only get one screen protector, and Belkin doesn’t include an alcohol wipe to help clean your phone. (You do get a microfiber cloth and dust-removal stickers.) The application process is OK; it leaves some wiggle room for error. That said, the privacy effect is great. No one can see your screen if they’re looking at it from an angle.

OtterBox Premium Pro Glass Blue Light Guard for $50: This one is easy to apply, but there’s little room for error, so you have to be careful. I accidentally put mine askew. It’s made of 60 percent recycled materials, and OtterBox has infused it with blue-light-filtering tech. To my eyes, I did not notice a difference when comparing it with another iPhone model that did not have a protector installed.

Nomad Magnetic Leather Back for $40: This is now the second “back” I’ve tested. It’s not a case, but just the back of a case magnetically attached to the back of the iPhone. It’s purely for aesthetics, but it’s not for me. I especially don’t like that sometimes when you pull the phone off a MagSafe charger, the leather back stays attached to the charger.

Belkin ScreenForce InvisiGlass Screen Protector for $25: The bare minimum for any screen protector should include an alcohol wipe so you can better clean your screen, and Belkin … doesn’t include one. There’s also a lot of wasteful plastic, though Belkin says this is made from postindustrial recycled content. The application tool worked well, but I had to work harder to remove the air bubbles.

Zagg XTR4 Screen Protector for $60: I don’t think Zagg’s application tool is the best. I tried it a few times successfully, but on my third try, I slightly miscalculated the angle when lowering the protector on the display, and unfortunately, the whole thing started sticking askew. I couldn’t do anything to stop it. So it’s not as good as the protectors above, but this is an otherwise fine screen protector that the company claims has been fortified with graphene for extra strength. I also had some trouble with air bubbles on this one.

Mujjo Full Leather Wallet Case for $64: This velour leather case from Mujjo is mostly OK. I’m not too fond of attached wallet cases like this because they permanently block wireless charging and the entire MagSafe module, making it impossible to attach other accessories with the case installed. You can only fit two cards here, but what makes it worse is the space for the Camera Control button is narrow and makes it hard to slide my finger. It needed a larger groove. I also tested Mujjo’s normal Full Leather MagSafe case ($59), which has a standard vegetable-tanned leather model and another made from bio-leather (corn, cereals, recycled polyester), and it too has the same problem with the Camera Control button. This could just be my thick digits.



Source link

Leave a Reply

Your email address will not be published. Required fields are marked *